MakerRepo Administrators, MakerRepo Staff
795
modifications
Modifications
Technologies numériques/Impression 3D/Impression 3D- Débutant (voir la source)
Version du 14 juin 2021 à 15:24
, 14 juin 2021 à 15:24aucun résumé de modification
L'impression 3D est un procédé de fabrication additive qui permet de créer un objet en trois dimensions à partir d'un modèle numérique.
L'impression 3D est un procédé de fabrication additive qui permet de créer un objet en trois dimensions à partir d'un modèle numérique.
==Quelles imprimantes 3D avons-nous?==
Voici les imprimantes disponibles dans le Makerspace.
{{PrinterInfobox
| name = Ultimaker 2+
| image = Ultimaker2+.png
| slicerName = Cura
| slicerLink = https://ultimaker.com/cura
| materials =PLA, ABS, Flexible
| minLayerHeight =0.06
| heatedBuildPlate =Yes
|float=none|buildWidth=223|buildDepth=223|buildHeight=205|Recommended Settings=https://en.wiki.makerepo.com/wiki/Ultimaker_2%2B}}
{{PrinterInfobox
| name = Ultimaker 3
| image = Ultimaker3.png
| slicerName = Cura
| slicerLink = https://ultimaker.com/cura
| materials = PLA, PVA, Flexible
| minLayerHeight = 0.02
| heatedBuildPlate = Yes
|float=none|buildWidth=215|buildDepth=215|buildHeight=200|Recommended Settings=https://en.wiki.makerepo.com/wiki/Ultimaker_2%2B}}
{{PrinterInfobox
| name = MakerBot Replicator 2
| image = Replicator2.png
| slicerName = MakerBot Print
| slicerLink = https://www.makerbot.com/3d-printers/makerbot-print/
| materials = PLA
| minLayerHeight = 0.1
| heatedBuildPlate = No
|float=none|buildWidth=285|buildDepth=153|buildHeight=155}}
{{PrinterInfobox
| name = Dremel 3D20
| image = Dremel-3D20.png
| slicerName = DigiLab 3D
| slicerLink = https://digilab.dremel.com/3D-software
| buildVolume = 230 × 150 × 140 mm
| materials = PLA
| minLayerHeight = 0.1
| heatedBuildPlate = No
|float=none|buildWidth=230|buildDepth=150|buildHeight=140}}
{{PrinterInfobox
| name = Raise3D N2 Plus
| image = Raise3D_N2_Plus.png
| slicerName = ideaMaker
| slicerLink = https://www.raise3d.com/pages/download
| buildVolume = 304.8 × 304.8 × 609.6 mm
| materials = PLA, ABS, PVA, Flexible
| minLayerHeight = 0.01
| heatedBuildPlate = Yes
|float=none|buildWidth=305|buildDepth=305|buildHeight=605}}
{{PrinterInfobox
| name = Markforged Mark Two
| image = Mk2.png
| slicerName = Eiger
| slicerLink = https://www.eiger.io/signin
| buildVolume = 320 × 132 × 154 mm
| materials = Nylon, Onyx, Carbon Fiber, Fiberglass, Kevlar
| minLayerHeight = 0.1
| heatedBuildPlate = No
|float=none|buildWidth=320|buildDepth=132|buildHeight=154}}