MakerRepo Administrators, MakerRepo Staff
795
modifications
Modifications
Page créée avec « {{PrinterInfobox | name = Dremel 3D20 | image = Dremel-3D20.png | slicerName = DigiLab 3D | slicerLink = https://digilab.dremel.com/3D-software | buildVolume = 230 × 150… »
{{PrinterInfobox
| name = Dremel 3D20
| image = Dremel-3D20.png
| slicerName = DigiLab 3D
| slicerLink = https://digilab.dremel.com/3D-software
| buildVolume = 230 × 150 × 140 mm
| materials = PLA
| minLayerHeight = 0.1
| heatedBuildPlate = Non
|float=right|buildWidth=230|buildDepth=150|buildHeight=140|recommendedSettings=https://fr.wiki.makerepo.com/wiki/Dremel_3D20}}
[[Category:Imprimantes 3D]]
| name = Dremel 3D20
| image = Dremel-3D20.png
| slicerName = DigiLab 3D
| slicerLink = https://digilab.dremel.com/3D-software
| buildVolume = 230 × 150 × 140 mm
| materials = PLA
| minLayerHeight = 0.1
| heatedBuildPlate = Non
|float=right|buildWidth=230|buildDepth=150|buildHeight=140|recommendedSettings=https://fr.wiki.makerepo.com/wiki/Dremel_3D20}}
[[Category:Imprimantes 3D]]