Modifications

Ligne 35 : Ligne 35 :  
[[File:Tubing Attachment 2.png|center|thumb|746x746px|Put on the accessory for lightweight parts when encountering slippage issues.]]  
 
[[File:Tubing Attachment 2.png|center|thumb|746x746px|Put on the accessory for lightweight parts when encountering slippage issues.]]  
   −
==== Part Position ====
+
==== Positionnement de la pièce ====
 
You want your part to be sitting against the plastic bumper on the left side of the tool. The rollers are made intentionally so that it pushes the part against that small plastic bumper to minimize lateral movement. Additionally, to avoid having the part moving while engraving, you want to do a ''Top-Down'' engraving. If you do a ''Bottom-Up'' engraving the part will move away that plastic bumper and warp your engraving.
 
You want your part to be sitting against the plastic bumper on the left side of the tool. The rollers are made intentionally so that it pushes the part against that small plastic bumper to minimize lateral movement. Additionally, to avoid having the part moving while engraving, you want to do a ''Top-Down'' engraving. If you do a ''Bottom-Up'' engraving the part will move away that plastic bumper and warp your engraving.
  
MakerRepo Staff, MakerRepo Volunteers
872

modifications