MakerRepo Administrators, MakerRepo Staff
531
modifications
Modifications
Aller à la navigation
Aller à la recherche
Ligne 132 :
Ligne 132 : − + − + Ligne 148 :
Ligne 148 : − + − + Ligne 164 :
Ligne 164 : − + − +
Technologies numériques/Impression 3D/Impression 3D- Débutant (voir la source)
Version du 31 mai 2024 à 14:27
, 31 mai→Quelles imprimantes 3D avons-nous?
| materials = ABS, Soluble support
| materials = ABS, Soluble support
| minLayerHeight = 0.254
| minLayerHeight = 0.254
| heatedBuildPlate = Yes
| heatedBuildPlate = Oui
| float = none
| float = none
| buildWidth = 254
| buildWidth = 254
| buildDepth = 254
| buildDepth = 254
| buildHeight = 305
| buildHeight = 305
| moreInformation = https://en.wiki.makerepo.com/wiki/Stratasys_Dimension_SST
| moreInformation = https://fr.wiki.makerepo.com/wiki/Stratasys_Dimension_SST_1200es
}}
}}
| materials = PLA, ABS, ASA, TPU, Soluble support
| materials = PLA, ABS, ASA, TPU, Soluble support
| minLayerHeight = 0.127
| minLayerHeight = 0.127
| heatedBuildPlate = Yes
| heatedBuildPlate = Oui
| float = none
| float = none
| buildWidth = 254
| buildWidth = 254
| buildDepth = 254
| buildDepth = 254
| buildHeight = 254
| buildHeight = 254
| moreInformation = https://en.wiki.makerepo.com/wiki/Stratasys_F170
| moreInformation = https://fr.wiki.makerepo.com/wiki/Stratasys_F170
}}
}}
| materials = Standard, ABS-like, rubber, etc
| materials = Standard, ABS-like, rubber, etc
| minLayerHeight = 0.01
| minLayerHeight = 0.01
| heatedBuildPlate = No
| heatedBuildPlate = Non
| float = none
| float = none
| buildWidth = 218.88
| buildWidth = 218.88
| buildDepth = 123.12
| buildDepth = 123.12
| buildHeight = 250
| buildHeight = 250
| moreInformation = https://en.wiki.makerepo.com/wiki/Elegoo_Saturn2
| moreInformation = https://fr.wiki.makerepo.com/wiki/Elegoo_Saturn_2_8k
}}
}}